SleepPro Custom + Easifit Combo (SPEasifit+SPCustom)

USD$ 224.99

Description

The SleepPro Custom is a special mouthpiece made from a laboratory-grade impression of your own teeth. What does that mean? Expect a perfect fit. It”s thin, it”s very comfortable, and the best part it will help you to stop snoring.

SleepPro Custom® with basic SleepPro Easfit®

  • 1 SP Easifit mouthpiece
  • 1 SP Custom mouthpiece mould
  • 1 impression materials
  • 1 insert
  • detailed fitting instructions
SleepPro Easifit InformationSleepPro Custom Information

Thank you for ordering a SleepPro Easifit. Mandibular advancement devices work by (i) pushing the jaw forward to create more space to breathe through in the upper airway and (ii) gently stretching the soft palate. This can be a very effective way of stopping snoring and making it easier to breathe while asleep.

Most people can fit a SleepPro Easifit themselves with no complications. However, some people benefit from having their dentist assess their teeth prior to fitting. If you think that this may be the case for you, then please make a dental appointment before fitting the device. We want you to overcome your snoring or sleep problem, but we don’t want you to come to any harm. In the unlikely event that your dentist advises that a mandibular advancement device is unsuitable for your teeth, then please contact us.

Please take your SleepPro Easifit with you every time you go for a routine dental check-up. Tell your dentist that you are using a mandibular advancement device and ask him or her to check for signs that it may be affecting your teeth or gums.

Helpful Hints

Please follow the fitting instructions very carefully and please note SleepPros may be unsuitable for people with bridgework. If your SleepPro Easifit does not work right away on the first night, then it needs to be remolded. Do not persevere in the hope it will get better. It will not. It needs to be remolded.

For example…

  • If you are still snoring, then you may need to remold the SleepPro Easifit with your jaw further forward.
  • If your jaw muscles hurt, then you may need to remold it with your jaw less far forward.
  • If it stops your snoring, but then your jaw drops out and you start snoring again, then you need to remold it taking extra care to push the mouthpiece against your teeth with your fingers and tongue during the molding process, or upgrade to a SleepPro 2 Custom. You may also like to try our SomnoSupport Chin Strap which is designed to keep your mouth from falling open while asleep.

Should you have any problems fitting your SleepPro Easifit, please read our Frequently Asked Questions and Answers document. It has lots of information about what to do if your SleepPro Easifit does not work.

The white plastic insert that comes with the SleepPro is very important. It is only used during the fitting process and is designed to keep the breathing holes open during the fitting process. It has another useful function and that is a way of seeing whether you have pushed your jaw forward, as it will rise like a drawbridge when your jaw goes forward. Once you have completed the fitting, you should remove it, but keep it somewhere safe in case you decide to redo the fitting at a later date.

What to expect in the first weeks:

Your partner will know whether the device works for you on the first night. However, it can take anything from a few days to couple of weeks to get used to wearing a SleepPro Easifit. As soon as you know that pushing your jaw forward stops your snoring, even if only for a short while, you can then consider upgrading to our SleepPro Custom, in the confidence that it will also work and that it will be easier to wear through the night. Or, like many of our customers, you may choose to keep using a SleepPro Easifit.

Some people tell us that for the first few nights they have difficulty keeping the mouthpiece in their mouth for the whole night, or it may fall out while asleep. This is normal and improves with time. Some people wear the mouthpiece for short periods during the day while they get used to it. Note: you are less likely to have these problems with a custom-made device, like our SleepPro  Custom.

The device will feel more comfortable with time. Many people experience discomfort in the front teeth during the settling in period. This is normal and usually disappears shortly after removing the mouthpiece. However, if the discomfort is excessive, or you feel that damage is being done to your teeth or gums, then stop using the device immediately and contact us. Once again, a custom made mandibular advancement device, like a SleepPro 2 Custom is likely to alleviate these problems.

Snoring and Sleep Apnea

Most people with Obstructive Sleep Apnea (OSA) snore, but only a small percentage of snorers have OSA. If your partner has noticed pauses in your breathing while you sleep, or if you have significant daytime tiredness, then you should mention this to your doctor and ask about a sleep study.

100% Maximum Risk Guaranty

Effective September 24, 2012, we are happy to refund per the following within 45 days, less our original shipping cost, subject to the following limitations:

  • The above 100% warranty applies to the SleepPro Easifit and Noiselezz and NOISELEZZ® II (SnoreEraser) product only.
  • The SleepPro Contour product carries a 50% – 45 day guaranty
  • The SleepPro 2 Custom is a custom-manufactured (for you only) appliance, purchased after due thought and testing. No warranty is stated or implied for the SleepPro 2 Custom appliance.
  • Combination discount will be deducted from refund where applicable.
  • Whether you actually use the appliance or not, once it has left our hands, it is considered “used”. We cannot, under any circumstances, resell any returned appliances. They are examined, documented and then immediately destroyed.
  • The appliance must be shipped according to our instructions (below).
  • Resale accounts are not eligible for this risk warranty or the repeat order discount.

RETURN SHIPPING INSTRUCTIONS

Please read and follow exactly. Please contact us first, permission is not required to return however our experienced staff may be able to assist you. Please ship via post, and only post (Standard surface or air mail, in an envelope is the most economical).

  • Mark the package “Canadian Goods Returning”, and “No Commercial Value.”
  • Your return address must be the same as the original “ship to” address, clearly marked on the outside of your return package. No protective, special packaging required.
  • Include a note of explanation and your name and address in full.
  • Please include an invoice number, there is no reason for special packaging, the contents being returned truly have no value and require no protection. No value on any customs form required please.
  • As well as the above comments, shipping by any other method (other than regular postage) will automatically be returned to the sender, at the sender’s cost.
  • Shipping Address:

    Therapy Control Products Inc.

    PO Box 70058,

    Creekside RPO

    Airdrie, AB

    Canada T4B 0V9

Watch Video

How It Works

  • We will send you a professional dental impression kit. Simply take an impression of your teeth. You can do this at at home. It’s easy and instructions are provided.
  • Send the mould to us, and we will create your own personalised SleepPro Custom mouth-piece with your dental impression.
  • We will mail you your SleepPro Custom once it’s ready and you can kiss snoring goodbye, and get used to enjoying a good night’s sleep.

It works, and it’s less than half the price of many alternatives.

SleepPro Custom is a Mandibular Advancement Device, one of only three methods which have been proven to be able to stop snoring, the others being CPAP and surgery. It is also the cheapest and most comfortable way to solve the problem, although you should seek a doctor’s advice if you have sleep apnea. SleepPro Custom is a worthwhile upgrade from SleepPro 1.

  • Nearly half the price of costly alternatives
  • Highly effective
  • Comfortable and easy to use
  • Perfect fit

Own a SleepPro1?

Try the Sleep Pro 1 first, then upon purchase of an SP 2 Custom, $25.00 will be deducted from the SP 2 Custom price. Only one discount or deduction will apply.

Fitting Instructions

This is a copy of the fitting instructions that come with your SleepPro Custom kit. Thank you for your Sleep Pro 2 order.

Contents of your order:

  • SleepPro Custom Impression Tray (SleepPro Easifit with holes for putty).
  • 2x Dental Putty Tubs.
  • Impression Return Bag.
  • SleepPro Custom Fitting Instructions.
  • Frequently Asked Questions.
  • Return Envelope.

Please find enclosed your impression kit, from which we will make your SleepPro Custom in our laboratory.

Please follow the enclosed fitting instructions very carefully and do not hesitate to contact us if you are unsure about any aspect of fitting your new mouthpiece: admin@nosnorezone.com

There are 3 stages to the fitting process. You need to complete Stage 1 before doing Stages 2 & 3.

Do not use a microwave. If for some reason your fitting does not go well and you need replacement impression trays or putty, please don’t worry. We will be more than happy to send you a replacement, so you can try again (there is a small charge for this). Just email admin@nosnorezone.com or call us at 1-877-771-7794.

Fitting instructions background – Key points:

  • You must have had at least some success with the SleepPro Custom Impression Tray 1, before sending your impression to the lab.
  • Most people can fit a SleepPro Custom themselves with no complications.
  • In the unlikely event that you experience excessive pain or discomfort, stop using the device immediately and contact us.
  • SleepPro’s may be unsuitable for people with bridgework.

The fitting process:

  • Stage one involves fitting and wearing a SleepPro Custom Impression Tray (without putty) for at least two nights, or until you have determined the right degree of jaw advancement. You need to be sure the mouthpiece is holding your jaw far enough forward to stop your snoring, but not so far forward that it is causing jaw muscle pain.
  • Stage two is to mix the dental putty, put it into the upper and lower sections of the impression tray and bite into it (hard).
  • Stage three is to return the completed impressions and impression tray to our lab in the envelope provided. It is really very simple, but it is important that you follow the instructions.

Stage 1: Impression Tray

It is extremely important that you familiarise yourself with these instructions. Please do not attempt to fit the mouthpiece until you understand the instructions. Please follow the instructions as precisely as possible.

What you will need before you start: (i) at least a mug of water, (ii) a kettle (or pot in which to boil water), (iii) a mug to put just boiled water into, (iv) cold water from a tap or in a bowl or mug (a second mug), (v) a spoon or fork to scoop the impression tray out of hot water (so you don’t scald your fingers), (vi) a watch or timer, and (vii) a mirror may be useful to help you see what they are doing.

  • The SleepPro Custom impression tray has a top and a bottom. The top has a notch.
  • Make sure the plastic insert or ‘handle’ is in the breathing holes at the front of the Sleep Pro impression tray. It should go all the way through.
  • Take just boiled water and put it in a mug. Let the water stand and cool for 1 minutes, then completely immerse the impression tray in the hot water for two (2) minutes. Scoop it out with a spoon or fork.
  • Shake it gently to remove excess water. Make sure it is not too hot before you put it in your mouth.
  • With the big notch at the top, place the mouthpiece in your mouth on your lower teeth first, then the upper teeth.
  • Push your jaw forward as you did when you fitted your SleepPro Easifit. Remember you should push your jaw far enough forward to stop your snoring, but not so far forward that it causes discomfort. If you are unclear about this point, or you have not used a SleepPro Easifit before, then please feel free to contact us. It is perfectly normal to re-do this stage several times until you get it right – we suggest starting with edge-to-edge where the top and bottom front teeth line up, or maybe a little more than this. If it doesn’t work, then try a different position.
  • Bite hard for about 10 seconds, with your jaw forward. Note the plastic insert / ‘handle’ is there (i) to give you something to hold onto when you put the impression tray in your mouth, and (ii) it provides some “give” when you bite into it, but at the same time holds the breathing holes open. If you find you need another impression tray, because something has gone wrong at this stage; don’t worry, this is absolutely no problem. Call us on this UK number 01962-761-831 and ask for another impression tray (there is a charge for this) or visit www.sleeppro.com/html/userinfo.html to order one online.
  • Suck to remove excess saliva and provide a better fit. After about 30 seconds take the device out of your mouth and run it under cold water until it has cooled. Repeat the process as required until you are sure the device is comfortable and you know it stops your snoring.
  • Remove the plastic insert when wearing the mouthpiece, but do not throw it away as it will be needed if you remould the mouthpiece.

Stage 1 in Summary:

  • Boil water and let it stand and cool in a cup for 1 minute.
  • Put impression tray in hot water for 2 minutes.
  • Place impression tray in mouth with big notch at top.
  • Bite hard and push your jaw forward. (look for the “drawbridge” effect as the jaw moves forward, the insert/handle rises like a drawbridge).
  • Use your index finger like a toothbrush to push the mouthpiece against your teeth.
  • Push the inside front section with your tongue, especially the bit behind your lower front teeth.
  • Suck, then bite for about 30 Seconds
  • Remove from mouth. Cool in water. Repeat if necessary

After you have completed Stage 1 and have tried the mouthpiece for at least one night, you must decide whether or not the mouthpiece is OK to be made into a SleepPro Custom. If you are unsure then, please contact us. If you are satisfied that the mouthpiece is: (i) comfortable (e.g. it is a bit bulky, but it does not cause your jaw muscles to ache) and (ii) you can confirm it stops your snoring (even if only for part of the night), then, and only then, should you proceed to stage 2. If you are not satisfied with points (i) and (ii) above, then you need to repeat stage 1. Feel free to contact us if you want to discuss what to do.

A SleepPro Custom cannot be “tweaked” once it is made, so you need to be sure that your SleepPro impression tray is satisfactory in terms of points (i) and (ii). If we make a SleepPro 2 Custom in the laboratory and you find it does not stop your snoring or causes your jaw muscles to ache, then there will be an additional charge to make you a new one (it cannot be remolded like a SleepPro Easifit).

Instructions – Stage 2 Taking the Impression with Dental Putty

After you have completed Stage 1 and have tried the mouthpiece for at least one night and you are sure the mouthpiece is comfortable, even if it is a bit bulky, and you can confirm it stops your snoring, only then you should proceed to Stage 2.

What you will need before you start: (i) a clean plate to mix the putty on, (ii) a watch or timer, (iii) a pair of scissors, and (iv) dental floss. Make sure the putties have been in the refrigerator for at least an hour prior to use and do not remove them from the fridge until you are about to start mixing.

Stage 2 Taking the Impression:

  • Make sure the impression tray is completely dry before using, particularly on the inside. The plastic insert / “handle” is optional for Stage 2.
  • Remove the putties from the putty containers before you start, but DO NOT MIX them until you are completely ready as you only have 30 seconds before the putty starts to set.
  • When you are ready, take the putties and knead them vigorously for 30 seconds. Knead them until they are one colour.
  • Quickly roll the mixed putties into a “sausage” about the length of a finger and break it in half. Push one “sausage” in the top tray and one in the bottom tray. The putty should be teased-out to fill the entire length of the top and bottom of the mouthpiece. Remember (i) you need to work quickly as you only have 30 seconds before the putty starts to set and (ii) you need to bite into the putty as soon as you have put it in the impression tray.
  • Check the tray is the right way up; that is, with the big notch at the top, put it in your mouth and locate it in place by biting hard into it. Bite hard through the putty – this will move your jaw forward and into place in the mouthpiece. DO NOT PUSH THE TRAY INTO PLACE WITH YOUR FINGERS.
  • Close your lips and keep your mouth shut for two and a half minutes. There is no need to continue to bite hard after a few seconds, but you should keep your mouth closed firmly.
  • After two and a half minutes, carefully remove the impression from your teeth and rinse it with cold or warm water.
  • If you are satisfied with the impression, then please send it to the Laboratory as instructed below. If not, then please contact us to discuss the next step. help@sleeppro.com or, if you are in the UK, call this number: 01962-761-831.
  • Write your name and address on the small Impression Return Bag. Put the completed impression in the small Impression Return Bag and seal it. Put this in the cardboard box (remembering to check that your name and address are on the Return Bag). It should then be sent to the address on the envelope where it will be made into your SleepPro Custom in our laboratory.
  • Feel free to use a pair of scissors to trim away some of the excess putty from above and below the plastic impression tray if it does not fit easily in the small bag and box that is sent to the lab.
  • If you have any particles caught between your teeth, they may be removed using dental floss.

Stage 2 in Summary

  • Remove putties from containers, but do not mix until you are ready.
  • Knead the putties until one colour (30 seconds maximum).
  • Roll into “sausages”. Place in Upper and Lower Sections of Impression Tray.
  • Check Impression Tray is Right Way Up (big notch at top).
  • Bite hard into Putty for 10 secs then bite firmly. DO NOT USE YOUR FINGERS. It is OK to bite through the putty.
  • Hold for 2 minutes with mouth closed firmly and then remove carefully from mouth.

Stage 3:

Send it to the Laboratory (in the envelope provided) to be made into your SleepPro Custom. If taking the impression did not go well, then please contact us. We may need to send you another impression kit – there will be a small charge for this.

Use of your SleepPro Custom

The mouthpiece will feel more comfortable with time. It is possible you may experience mild discomfort in the teeth and jaw during the settling-in period. This is not unusual and normally disappears shortly after removing the mouthpiece. However, please use common sense – if you have any questions, remember we are here to help (we cannot give medical advice, but we can provide general pointers).

Care of Your SleepPro Custom

Please treat your SleepPro 2 Custom with care and be gentle when putting it in and taking it out of your mouth. Gently brush your SleepPro Custom after use under running water and, occasionally, an antiseptic mouthwash (of the type you can buy from a supermarket). We do not recommend toothpaste as it contains abrasives that will cause damage; however, the occasional brush with toothpaste may not cause a problem. Leave your mouthpiece exposed to the air during the day, so it can dry out. This will help to kill organisms that may make it smell. Do not attempt to remold a SleepPro Custom in hot water as this will make it unwearable.

100% Maximum Risk Warranty

Effective September 24, 2012, we are happy to refund per the following within 45 days, less our original shipping cost, subject to the following limitations:

  • The above 100% warranty applies to the SleepPro Easifit and Noiselezz and NOISELEZZ® II (SnoreEraser) product only.
  • The SleepPro Contour product carries a 50% – 45 day warranty
  • The SleepPro Custom is a custom-manufactured (for you only) appliance, purchased after due thought and testing. No warranty is stated or implied for the SleepPro Custom appliance. See also “Policy” tab above for more information.
  • Combination discount will be deducted from refund where applicable.
  • Whether you actually use the appliance or not, once it has left our hands, it is considered “used”. We cannot, under any circumstances, resell any returned appliances. They are examined, documented and then immediately destroyed.
  • The appliance must be shipped according to our instructions (below).
  • Resale accounts are not eligible for this risk warranty or the repeat order discount.

RETURN SHIPPING INSTRUCTIONS

Please read and follow exactly. Please contact us first, permission is not required to return however our experienced staff may be able to assist you. Please ship via post, and only post (Standard surface or air mail, in an envelope is the most economical).

  • Mark the package “Canadian Goods Returning”, and “No Commercial Value.”
  • Your return address must be the same as the original “ship to” address, clearly marked on the outside of your return package. No protective, special packaging required.
  • Include a note of explanation and your name and address in full.
  • Please include an invoice number, there is no reason for special packaging, the contents being returned truly have no value and require no protection. No value on any customs form required please.
  • As well as the above comments, shipping by any other method (other than regular postage) will automatically be returned to the sender, at the sender’s cost.

Policy

For a SleepPro Custom, the following policy applies: a SleepPro Custom should last at least one year, in the absence of excessive teeth grinding. In the event that you need to replace your SleepPro Custom, we shall credit the replacement cost as follows: Given that the mouthpiece should last at least 12 months, if it only lasts for 11 months, then we will credit 1/12 of the original cost against the cost of the replacement. If it lasts 10 months, then we will credit 2/12 of the original cost and so on to six months where we will credit half the amount paid. If you need to replace your SleepPro custom prior to that, then we will replace or repair it at no charge to you, after you return it to the laboratory for inspection. If there is excessive teeth grinding, or other signs of out-of-the-ordinary wear and tear, then the above policy does not apply.

Credits apply to the 12 month period from the first purchase date and do not apply to replacement mouthpieces.

No other warranty is stated or implied for the SleepPro Custom appliance

Reviews

There are no reviews yet.

Be the first to review “SleepPro Custom + Easifit Combo (SPEasifit+SPCustom)”

Your email address will not be published. Required fields are marked *